How To Install Window Blinds In Miami

Numerous Miami families choose window blinds when they need more privacy and governance over natural light in their homes. They’re a useful and cost-effective window treatment. Experienced DIYers can also secure them in a couple of steps. Even so, nothing is better than working with an expert window treatment installer. Here are the basics of hanging window blinds and when you should call the professionals to do it for you.

Take Measurements And Mark Everything Exactly

Before you start, decide if you want inside-mount or outside-mount blinds. This vital decision will let you know where to measure. Measure the depth, height, and width within your window frame for inside-mount installations. For outside-mount blinds, measure the width and height of your window, including the trim, and then increase your measurements by three inches to ensure proper coverage. Measure precisely–refrain from rounding up or down. Ill-fitting blinds will not function correctly.

Choose Your Blinds

When you get your measurements, you can choose your blinds. You probably know what kind of blinds you wish to have. Get blinds that coincide with your measurements as closely as possible. Ready-made blinds often won’t fit perfectly, either extending out too much or not reaching the window edge properly. Make sure you are provided fasteners that let your blinds attach at the right depth, as well. You’ll want to order custom-made blinds and parts for the best fit.

Install Your Blinds

Your blinds may be accompanied by instructions. Use them to install your specific product. If you want a sample of how hard it is to install window blinds in Miami, here are some basic steps to give you a better idea.

 

Inside Mount Blinds

 

1. Affix a bracket at the top of the window’s frame approximately an inch from the edge. Ensure this positioning won’t hinder the blind’s operating mechanisms. Mark the bracket holes with a pencil.
2. Drill pilot holes on your marks.
3. Situate the hardware where you drilled and secure with screws.
4. Repeat the first three steps for the next bracket.
5. Snap the end caps onto the blind’s top rail. Fit the rail into the brackets.

Connect the tilt wand and test. Also, try out the pull cord.

Outside Mount Blinds

1. Figure out if you’re installing on the window trim or wall around the window. Hold the headrail in place and make sure the blind covers the bottom of the window.
2. Mark each end of the headrail.
3. Measure four inches from both headrail marks and mark here for the screws.
4. Drill pilot holes in the proper spots.
5. Align the bracket holes with the drilled holes and attach with screws.
6. Position the top rail into the brackets.

Attach the tilt wand and test to ensure everything works.

Choose The Most Effortless Way To Install Blinds 

As you know, you aren’t required to put up blinds yourself. The most effortless way to install window blinds in Miami is to hire an expert window treatment installer. They will assist you every step of the way. They’ll help you select blinds that accommodate your needs, make precise measurements for a custom-made product, and install them for you. They guide customers daily, so they’ll handle your job efficiently and accurately. They’ll be able to remedy any issues without spending hours looking for help on the Internet. A window treatment specialist will also provide higher-quality blinds than large retail outlets or online marketplaces.

Avoid The Hassle And Have Sunburst Shutters Install Your Window Blinds In Miami

Upgrading to new window blinds in Miami couldn’t be more effortless when you turn to Sunburst Shutters Miami. We’ll help you find custom blinds that will suit your windows perfectly, and our expert installation team will affix them for you. All you must do is call 305-520-7515 or submit the form below to schedule a free in-home consultation.